021 8690 6777, 8690 6771, 9529 3259
BB Pin: 2856BC08
 
Home   »   Produk   »   Alat Peraga Politeknik   »   Alat Peraga Teknik Mesin   »   Alat Peraga Mesin
 
 

Cnc lathe / turning - COMPAC-AP200T

 
 
 

Untuk memesan, silahkan tekan tombol ORDER. Anda bisa memesan barang secara Online.

 

Anda juga bisa memesan via telephone, silakan hubungi sales consultant. Hotline kami di (021) 8690 6777 sales Consultant kami akan menjelaskan detail produk dan harga terbaru. atau email ke alamat sales@alatperaga.com

COMPAC-200T was designed to:

  • Meet the actual demands of qualified industrial Education for CNC-Standard
  • Utilized based on a sophisticated machine tool concept at high Industrial Standard with most
  • modern control system Siemens 802C for training in Din-Code and Conversational Programming
  • Offer optional specialized PC-Based software applications for basic training and programming to be used for qualified education of students.

COMPAC-200T Mechanical Specifications
Basic functions

  • Swing over bed : 175 mm
  • Cross travel, Stroke X : 140 mm
  • Longitudinal travel, Stroke Z : 320 mm
  • Distance between centers : 480 mm
  • Rapid feed : 3 m/min
  • Resolution : 0.005 mm
  • Head stock
  • Speed range : 100 to 3000 rpm
  • Power : 1.2 kW
  • Chuck diameter : 160 mm
  • Turret
  • Number of tools : 8
  • Tool holder system : VDI
  • No. of controller axis : 3
  • Screen : Monochrome
  • I/O Module : 48 / 16 DI/O
  • Interface : RS 232
  • General specs
  • Weight : 700 kg
  • Floor space
  • L x W x H (approx) : 1600 x 1000 x 1500 mm
  • Power supply : 220V, Single phase, 50Hz
  • Safety Devices
  • Enclosed working area : Yes
  • Door limit switch : Yes
CNC Controller Modes, Siemens 802C
  • Set-Up : Entering Tools and Tools Offsets, Creating A New Tools, Tools Compensation Data, Entering Modifying and Determining Zero Offset and R Parameter.
  • Manual Operated Mode : Jog Mode, Hand wheel and MDA (Manual Data Input).
  • Automatic Mode : Selecting/Starting Part program, Block search, Stop / Abort Part program and Repositioning after interruption.
  • Part Programming : Enter/Edit New program, Programming Support, Vertical menu, Cycles, Contour and User Assignable Soft keys.
  • Services and Diagnosis : Data Transfer Via V24 Interface, Interface Parameters, Special Functions, Diagnosis and Start-Up.
  • Programming : Program Structure, Word structure and Block structure and Character Set.
  • Cycles : refer to Controller Features.
  • Pocket Calculator : To calculate the required value and can use the four basic arithmetic operations and functions Sine, Cosine, Squaring
  1. Off – Line Simulation /Programming system (Optional)
  2. CNC simulation system TopTURN and TopCAM
  3. MDI machine setup
  4. Off line program / cutting verification
  5. Machining quality control system
  6. Machining analysis
  7. 3-D simulation
  8. DNC transmission