021 8690 6777 | 021 8690 6770
0812 9049 9480 | 0812 9595 7914 | 0812 8006 9024
0813 8742 8586 | 0878 7867 0721
0812 1470 6170 | 0813 1066 1358 | 0888 6129 511


Thermal Solar Energy Unit


Untuk memesan, silahkan tekan tombol ORDER. Anda bisa memesan barang secara Online.


Anda juga bisa memesan via telephone, silakan hubungi sales consultant. Hotline kami di (021) 8690 6777 sales Consultant kami akan menjelaskan detail produk dan harga terbaru. atau email ke alamat sales@alatperaga.com


The unit is a system that transforms solar energy into calorific energy. This unit uses the thermosiphon system to heat water or the traditional pumping system. In both cases, the absorbed calorific energy is given by the solar radiation simulated, in our case, by a panel with powerful luminous sources.




Anodized aluminium structure.
Main metallic elements in steel.
Diagram in the front panel with similar distribution to the elements in the real unit.
Solar panel (Thermal solar collector):
Steel structure.
Pipes (already prepared) to connect the panel and the accumulator. Copper pipes.
Over-pressure security valve.
Manometer, range: 0-4 bar.
o Temperature sensors, type “ J “ , range: -40 to 750 C.
Thermal accumulator tank (from 150 to 200 l. approx.):
Vacuum vitrified heater, high efficiency heating and anti-corrosion protections.
It has a supporting heating group, with a regulation electric heating resistance. Range of the resistance: 3000W.
Contact thermostat to control temperature.
Solar simulator:
Aluminum structure regulated in height.
Sixteen ultraviolet lamps of 300 W each one.
Electricity security group, made up by 3 magnetothermics.
Feed wire.
With this unit you can simulate three operating possibilities: with all the lamps on (16), with half of the lamps on (8), and with
only one lamp on.
Pumping equipment:
Impulse pump, range: 0-2 l. /min.; 0.6 bar.
3 Flow meters:
One of 0-2 l./min. in the primary circuit (forced circulation, with pump).
One of 4-60 cc/min in the primary circuit (free circulation, without pump).
One of 2-10 l/min in the secondary circuit.
o 10 Temperature sensors, type “J“, range: -40 to 750 C.
Protection curtains.
Electronic Console:
Metallic box.
Connections for temperature sensors.
Digital display for temperature sensors.
Selector for temperature sensors.
Pump switch.
Heating resistance switch.
3 Switches for lamps (one for all the lamps on (16) , other for half of the lamps on (8) and the another for only one lamp on.
Cables and accessories, for normal operation.
This unit is supplied with the following manuals: Required Services, Assembly and Installation, Starting-up, Safety, Maintenanc & Practices



  • Electrical supply: single-phase, 220V./50 Hz or 110V/60 Hz, minimum power 6000W.
  • Water supply: 2 bars.



  • Unit: Dimensions:2200x1200x2005 mm. approx.
  • Weight : 290 Kg. approx.
  • Electronic Console : -Dimensions: 490x330x310mm. approx.
  • Height: 10 Kg. approx