Photovoltaic Solar Energy Modular Trainer "MINI-EESF" is a laboratory scaled unit designed to study all the parameters involved in the solar
radiation direct conversion into electricity.
The trainer is based on some application modules and photovoltaic solar panels assembled in mobile structures.
It is specially designed for the theoretical and practical study of the electrical installations with photovoltaic solar energy, the typical configurations
used in photovoltaic installations and the operation of the different elements involved in the conversion.
The power obtained from the solar energy can be:
Regulated to obtain a DC power to charge a battery, studying parameters such as solar module´s current output charge level, battery voltage,
Delivered to DC loads, studying parameters such as solar module´s current output and current consumption by the loads.
Converted to AC power to be delivered to AC loads, studying parameters such as current consumption by the loads.
Injected to the grid, studying parameters such simulated solar module´s current and voltage outputs, power injected to the grid, mains voltage
and frequency, etc.
Three different versions are available with different practical possibilities and levels of difficulty: MINI-EESF, MINI-EESF/M and MINI-EESF/B.
Supply and Consumption at 12 V (DC).
Supply and Consumption in alternating current (AC).
Supply to the public network (grid).
Solar Panel (polycrystalline) mounted on an anodized aluminum structure with wheels for mobility, and with calibrated cell to
measure solar irradiation.
It consists of 36 high performance photovoltaic cells (35 x 55 mm), with a typical power of 50Wp for a 17Vdc voltage.
Both the protections and the used materials give it water proof properties, abrasion protection, hail impact protection and several
other adverse environmental factors protection.
Maximum nominal power: 66W.
Voltage at maximum power point (Vmpp): 17.8 V.
Current at maximum power point (Impp): 3.70 A.
Short-circuit current (Isc): 4.05 A.
Open circuit voltage (Voc): 22.25 V.
Dimensions: 660 x 35.5 x 780 mm. Weight: 3 Kg. approx.
Battery offering optimal performance with low power applications. Capacity: 32Ah with 96 Wh per day.
Set of interconnection cables.
Anodized aluminum framework for modules allocation.
Modules:ES10. Solar charge controller with an automatic recognition for operating voltage 12 V or 24 V. It monitors various parameters such as voltage, current and charge level of the battery, load current and status, accumulative values, etc. Additional functions that can be activated such as the settings, night light function and auto-test. The regulator is equipped with various devices to protect its electronics, battery and load.
ES20. Loads module that incorporates two 12 V, 50W lamps, with independent switches.
ES30. DC/AC inverter that outputs a sinewave shaped output of 230V/50Hz ± 2% (or 115V/60Hz ± 3%) and the nominal input voltage is 12Vdc. Two different operating modes: continuos mode and ASB mode (Auto Standby) to reduce the power consumption. It is provided with a diagnosis system to indicate the user the status by different flash sequences
ES40. AC Voltage measurements module until 250V. and DC until 250 V.
ES50. Loads module that incorporates two lamps of 220V. or 110V., 50 W., with independent switches.
ES80. Module for measurements of solar irradiation (W/m2) and measurements of current until 10 A.
ES90. Module for 12Vdc battery charger.
EE-KIT2. Grid Connection Inverter Kit.
Inverter used for the conversion and injection to the grid of the power generated by a simulated source of renewable energy. The simulated source is a simulator used to obtain a variable power to be injected to the grid. The operation mode is displayed by means of a LED indicator at the front side of the housing. It is equipped with extensive safety measures to ensure that it switches off immediately as soon as the AC plug is removed from the wall socket or the public grid fails in operation. The inverter can be connected to a PC through RS232 communication to display some parameters such as voltage and current inputs, mains voltage and frequency, maximum AC power, KWh, etc.
Nominal power @ 25ºC: 535 W.
Maximum power @ 25ºC: 600 W.
PV power: 160-700 Wp.
MPP voltage: 40-125V DC.
Maximum voltage: 155V DC.
Nom. rated current: 8 A.
Voltage: 85% 110% Un (195-253 V).
Nominal power: 525 W.
Maximum power/fuse: 2.25 A / 3.15 A.
Frequency: 49.5 50.5 Hz.
Cables and Accessories, for normal operation.
This unit is supplied with the following manuals: Required Services, Assembly and Installation, Starting-up, Safety, Maintenance &