021 8690 6777 | 021 8690 6770
0812 9049 9480 | 0812 9595 7914 | 0812 8006 9024
0813 8742 8586 | 0878 7867 0721
0812 1470 6170 | 0813 1066 1358 | 0888 6129 511

Home   »   Produk   »   Alat Peraga Universitas   »   Alat Peraga Teknik Mesin   »   Alat Peraga Mesin

Controller Tuning Trainer


Untuk memesan, silahkan tekan tombol ORDER. Anda bisa memesan barang secara Online.


Anda juga bisa memesan via telephone, silakan hubungi sales consultant. Hotline kami di (021) 8690 6777 sales Consultant kami akan menjelaskan detail produk dan harga terbaru. atau email ke alamat sales@alatperaga.com


Trainer for controller tuning. This unit permits the interaction between controller and controlled system. The objective is that the closed control loop, formed by the controller and the controlled system, to show the desired optimum response. With a simulation software the setting of controller parameters can be practised safely. Closed an open loop control, step response, stability, disturbance and control response are demonstrated. This trainer no needs real controlled systems, the controlled system is simulated on a computer (PC) by the simulation program. In this program the most important types of controlled systems can be selected . We can recorder and analyse the time response using the software. The process controller used can be easily configured from the computer (PC) across an interface using the configuration software. The controller and the computer (PC) are connected by a data acquisition card with AD and DA converters.
The trainer basically is formed by:

  • Digital process controller, configurable as a P, PI or PID controller, with interface.
  • Interface for computer (PC).
  • Data acquisition card for computer (PC).
  • Simulation software for different controlled system types.
  • Configuration software for the controller.



Trainer for controller tuning.
Steel box.
Configurable digital process controller, with interface:
Configurable as P, PI or PID controller. Proportional gain X : 0-999.9%. Integral action time T : 0-3600s. Derivative time T : 0- p n v
Interface for computer (PC).
Data acquisition card for computer (PC).
Simulation Software for controlled system models, such as 1st and 2nd order lags, time-delayed systems etc. Controlled system
simulation models with proportional, integral, 1st order lag, 2nd order lag, time-delayed response, non-linearity and limitation.
Configuration software for process controller.
Recording and evaluation of time response on computer (PC).
Process variables as analog signals: 0-10V.
Set of cables.
This unit is supplied with the following manuals: Required Services, Assembly and Installation, Starting-up, Safety, Maintenance & Practices Manuals.