021 8690 6777
0812 9049 9480
 
Home   »   Produk   »   Alat Peraga Universitas   »   Alat Peraga Teknik Mesin   »   Alat Peraga Mesin
 
 

Ultrasonic Flaw detector TUD 210

 
 
 

Untuk memesan, silahkan tekan tombol ORDER. Anda bisa memesan barang secara Online.

 

Anda juga bisa memesan via telephone, silakan hubungi sales consultant. Hotline kami di (021) 8690 6777 sales Consultant kami akan menjelaskan detail produk dan harga terbaru. atau email ke alamat sales@alatperaga.com

Descriptions

Alat NDT/ alat uji tanpa merusak menggunakan teknologi ultrasonik untuk menguji dan mengukur keretakan pada besi maupun hasil sambungan (cacat) pada sebuah pengelasan crack, porosity, dan laminasi memanfaatkan metode echo to echo

Feature

  • Real-time multi function system, stable, reliable and efficient operation
  • The embedded software can be updated online
  • Big memory of 400 A graph and 40000 thickness value
  • Super Fast sampling capability, RF wave full display
  • Wide & high bright EL display screen
  • Alternative switch between single probe and double probe
  • DAC automatically creation with standard test block
  • Li battery, continue working time up to 6 hours
  • USB and RS232 interface
  • Adjustability of DAC curve is available for various requirements of DAC application
  • High speed sampling, radio frequency display with 80 MHz for sampling Min. display range 2.5mm

Spesification

Test modes Pulse-echo and dual
Pulse Spike excitation pulse
Measuring range 2.5mm to 5000mm / 0.1inch to 200 inch
Sound speed 2.5mm to 5000mm / 0.1inch to 200 inch
Sound speed 1000 m/s~9999m/s
Vertical linearity error ≤3
Dynamic range ≥32dB
Horizontal linearity error ≤0.2
Display delay -20μs to +3400μs
Sensitivity leavings ≥50dB
Probe delay 0μs 99.99μs, resolution 0.01
Gain 0-110 dB variable in selectable steps of 0.2,0.5 ,1,2,6,12, and locked
Damping 50 ohms, 150 ohms, and 400 ohms
Rectification Full wave, positive half wave, negative half wave and RF
Bandwidth 0.2MHz~10MHz Low0.2~1 Mid.0.5~4 High 2~10
Reject Linear, 0-80% of full screen, variable in steps of 1%
Scanning Resolution 0.1mm (2.5mm ~100mm) 1mm (100 mm ~5000mm)
Display screen 320×240 pixels
Distance readout Provide single echo or echo to echo thickness reading or sound path, surface, and depth reading for angle beam testing with either peak or flank detection.
Unit mm/inch
Interface RS 232 and USB interface 9600 baud, 8 bits word length, no parity, 1 stop bit
Printer driver TP UP-NH-S thermal printer
Power supply Li batteries, continues working time approx. 6 hours
AC requirements 85 to 264V AC/1.0A, 47 to 63Hz
Charging time 5 hours maximum
Operating temperature 0 ℃ to +40℃
Storage temperature -20℃ to+60℃
Dimensions (D×W×H) 53 mm×184 mm×230 mm
Weight 1.2 kg
Probe connector LEMO