021 8690 6777 | 021 8690 6770
0812 9049 9480 | 0812 9595 7914 | 0812 8006 9024
0813 8742 8586 | 0878 7867 0721
0812 1470 6170 | 0813 1066 1358 | 0888 6129 511

Home   »   Produk   »   Alat Peraga Universitas   »   Alat Peraga Teknik Mesin   »   Alat Peraga Mesin

Laminar Flow Visualization and Analysis Unit


Untuk memesan, silahkan tekan tombol ORDER. Anda bisa memesan barang secara Online.


Anda juga bisa memesan via telephone, silakan hubungi sales consultant. Hotline kami di (021) 8690 6777 sales Consultant kami akan menjelaskan detail produk dan harga terbaru. atau email ke alamat sales@alatperaga.com


 The Laminar Flow Visualization and Analysis Unit allows a complete study of the two-dimensional problems associated with the laminar flow by means of the visualization of the different models of flow that can be  visualized with the help of an efficient system of injection of coloured liquid. It is an amplification of the Hele-Shaw apparatus. It is a floor standing unit, with a wide work surface to an appropriate height. It has a wide work area that incorporates 8 drains and 8 sources. The work section consists on two glass sheets, separated by means of space bars at a certain distance. It has a tank at the input and at the output of the work section, besides control valves. The glass sheets are separated by means of space bars, at a distance that can be adjusted as it is necessary, to achieve an exact study of the laminar flow around different hydrodynamic models. The inferior sheet is grid-printed, to make the flow visualization easier, with eight drains that placed along the central line of the glass sheet in a cross-shape. It has a tank connected to an injection colouring system that consists on a system of needles placed at he input of glass sheet.




  • Anodized aluminium structure.
  • Main metallic elements in stainless steel.
  • Process diagram in the front panel with similar distribution to the elements in the real unit.
  • Autonomous Unit that is placed on the floor , equipped with wheels for mobility and with brake to
  • immobilize the unit during the practices.
  • Laminar flow visualisation table.
  • Flow visualisation area.
  • 8 sources and 8 drains.
  • Control valves of the drains and sources.
  • Input control valves.
  • Tank of ink.
  • Manifold of ink.
  • Draining valve.
  • Tank at the input and output of the work section.
  • Grid to facilitate the visualisation of the lines of flow.
  • The top glass sheet of the visualisation area has handles to be able to lift it with easiness for its correct
  • operation or to install the different
  • hydrodynamic models.
  • The central drain of the inferior badge, placed in the visualisation area, has a double-shape, that is to
  • say, two orifices in vicinity.
  • The control systems allow that every, or some, of the drains and sources are fed at the same time.
  • It is supplied with a coloured liquid injection system, for a better visualization of the lines of flow. It
  • consists on 19 needles, placed among the
  • glass sheets at the input. They are feed from a simple adapter. Through each needle an appropriate
  • quantity of colouring is injected and the
  • direction is visualized with clarity.
  • It includes a set of hydrodynamic models formed by:
    3 circular models: 40, 60 and 80 mm diameter.
    3 square models: 40, 60 and 80 mm of length.
    1 wing-shape model.
    The Unit can be completely purged, opening the emptying valves, placed in the base of the input and output tank.
  • Manuals:
    This unit is supplied with the following manuals: Required Services, Assembly and Installation, Starting-up, Safety, Maintenance & Practices Manuals.