s unit allows the detailed study of fluid friction head losses which occur when a fluid flows through pipes, fittings and flow metering elements.
Anodized aluminium structure and panel in painted steel. Main metallic elements in stainless steel.
Diagram in the front panel with similar distribution to the elements in the real unit.
Cables and accessories, for normal operation.
Quick connections. Rapidity and facility to replace parts of the unit, in case of failure or breaking. Transparent elements.
Rough pipe of diameter D= 17 mm. (PVC ). Rough pipe of diameter D= 23 mm. (PVC ).
Smooth pipe of diameter D= 6.5 mm. (Methacrylate).
Smooth pipe of diameter D= 16.5 mm. (PVC). Smooth pipe of diameter D=26.5 mm. (PVC).
2 Manometric tubes. Range: 1000 mm. H2O.
2 Bourdon type manometers. Range: 0-2.5 bar.
34 Pressure takings.
Inclined seat valve. Floodgate valve. Flow regulation valves. Membrane valve.
Abrupt broadening. Abrupt contraction.
Venturi tube of transparent plastic.
Diaphragm of transparent plastic.
45º elbow. 90º elbow. Two 90º elbows (in S).
Pipes in parallel confugurations.
Pipe section with a Pitot tube and static tapping.
Basic Hydraulic Feed System (FME00/B):
Centrifugal pump: 0.37 KW, 30 - 80 l/min at 20.1-12.8m. single-phase 220V. / 50Hz. or 110V. / 60Hz. Stainless steel impeller.
Pump breaker starting. Safety differential switch.
Tank capacity: 140 litres approx.
Membrane type flow adjusting valve.
This unit is supplied with the following manuals: Required Services, Assembly and Installation, Starting-up, Safety, Maintenance & Practices Manuals.