021 8690 6777, 8690 6771, 9529 3259
BB Pin: 2856BC08
 
 
 

Computer Controlled Teaching Unit for the Study of Regulation and Control

 
 
 

Untuk memesan, silahkan tekan tombol ORDER. Anda bisa memesan barang secara Online.

 

Anda juga bisa memesan via telephone, silakan hubungi sales consultant. Hotline kami di (021) 8690 6777 sales Consultant kami akan menjelaskan detail produk dan harga terbaru. atau email ke alamat sales@alatperaga.com

RYC. Unit:

  • Metallic
  • Diagram in the front panel with similar distribution to the elements in the real unit.
  • 3 Modules of Controller of 1st Order.
  • 3 Modules of Integrator.
  • 2 Modules of Inverter Amplifier.
  • Module of Inverter Reductor.
  • Module of Negative Zero.
  • Module of Positive Zero.
  • Module of Hysteresis.
  • Module of Limiter.
  • Module of Controller of 2nd Order.
  • Module of Adding.
  • 14 Capacitors from 1mF to100mF.
  • 6 Diodes.
  • 34 Operational Amplifiers.
  • 33 Potentiometers.
  • 186 Resistances.
  • 2 Transistors.
  • On/Off switch.
  • Fuse.
  • Connector to PC.
  • Control Interface.

DAB. Data Acquisition Board: PCI Data acquisition board (National Instruments) to be placed in a computer slot. Bus PCI Analog input: Channels= 16 single-ended or 8 differential. Resolution=16 bits, 1 in 65536.Sampling rate up to: 250 KS/s (Kilo samples per second). Input range (V)= 10V.Data transfers=DMA, interrupts, programmed I/0. Number of DMA channels= Analog output:Channels=2. Resolution=16 bits, 1 in 65536. Maximum output rate up to: 833 KS/s. Output range(V)= 10V. Data transfers=DMA, interrupts, programmed I/0.Digital Input/Output: Channels=24 inputs/outputs. D0 or DI Sample Clock frequency: 0 to 1 MHz.Timing: Counter/timers=2. Resolution: Counter/timers: 32 bits.

RYC/CCSOF. Computer Control+Data Acquisition+Data Management Software: Compatible with actual Windows operating systems. Graphic and intuitive simulation of the process I screen. Compatible with the industry standards.Registration and visualization of all process variables in an automatic and simultaneous way.Flexible open and multicontrol software, developed with actual windows graphic systems, actingsimultaneously on all process parameters.Management, processing and comparison of data.Sampling velocity up to 250,000 data per second.Comparative analysis of the obtained data, after the process and modification of the conditions duringthe process.

Cables and Accessories, for normal operation.

Manuals: This unit is supplied with 8 manuals: Required Services, Assembly and Installation, Interface and Control Software, Starting-up, Safety, Maintenance, Calibration & Practices Manuals.box.