021 8690 6777, 8690 6771, 9529 3259
BB Pin: 2856BC08
 
 
 

Luminosity Control Station

 
 
 

Untuk memesan, silahkan tekan tombol ORDER. Anda bisa memesan barang secara Online.

 

Anda juga bisa memesan via telephone, silakan hubungi sales consultant. Hotline kami di (021) 8690 6777 sales Consultant kami akan menjelaskan detail produk dan harga terbaru. atau email ke alamat sales@alatperaga.com

DESCRIPTION

Application for the luminosity control. It is composed by several modules in order to carry out practices with the aim of learning the use of a luminosity control station. It requires alternating single-phase supply and it brings a fuse of 3 A on the back side of the equipment for the security of the components. It also has an automatic magneto-thermal and differential switch on the back side .

AD6A. LUMINOSITY CONTROL STATION:
Application, in metallic box, including:

  • ALI02. Domestic Main Power Supply module:
  • This module let us supply the rest of modules.
  • Magneto-thermal protection.
  • Differential protection.
  • Single-phase plug and terminals.
  • 2 lamps.
  • One voltage output in plug format and two voltage outputs from terminals L (line), N (neutral) and GND (ground).
  • Mushroom security button.
  • Removable key with two positions (ON and OFF) that works as the main switch.
  • COM14. 2 Commutators module:

 

  • 2 commutators for domestic use.
  • Each commutator has 2 output terminals and 1 input terminal.
  • 10 A.
  • 250 Vac.

 

  • LAM08. 2 Lamp-holders + Incandescent Lamps (40W) module:
  • 2 lampholders for incandescent bulbs.
  • Two 40W incandescent bulbs.
  • Input and output terminals.
  • REG06. Voltage Electronic Regulator (Switch) 40 to 300W/230 Vac module:

 

  • Domestic variator of luminous intensity.
  • It works with incandescent lamps and with halogen lamps.
  • With the use of a dimmer we can regulate the current level that we let pass in.
  • Protection fuse 4 A.
  • 230 Vac.
  • 40 to 300W.
  • INT18. 1-pole Switch + 1-pole Switch with Light module:
  • 1 One pole switch, with 1 input terminal and 1 output terminal.
  • 1 One pole switch with light, with 1 input terminal and 1 output terminal.
  • 10 A.
  • 250 Vac.
  • Domestic use.
  • LAM10. 2 Halogen Lamps module:
  • 2 Halogen lamps of 12 V. and 20 W.
  • Input and output terminals.
  • High quality light bulbs.
  • To supply the two halogen lamps which require 12 V., this module has two transformers inside (220V/12V).
  • LAM09. Fluorescent Lamp module:
  • Fluorescent lamp circuit of 8 W.
  • The circuit consists of a reactance, a starter and a fluorescent tube between the two electrodes.
  • 230 Vac.
  • The fluorescent support has a switch on the upper side, to be switched ON/OFF.

 

  • SEN26. Presence and Movement Sensor (Wall) module:

 

  • Presence and movement detector for the lamps control.
  • It can work with loads, either incandescent lamps or halogen lamps.
  • 0 to 180º detection.
  • 12 m.
  • Timing 10 sec.-15 min.
  • Luminosity regulation 2-120 lux.
  • Input and output terminals.
  • Cover for dark room simulation.

Two-pole automatic differential switch and two-pole automatic magneto-thermal switch for the equipment security.
Fuse (3 A).
Cables and Accessories, for normal operation.
Manuals: This application is supplied with the following manuals: Required Services, Assembly and Installation, Starting-up, Safety,
Maintenance & Practices Manuals.