Diagram in the front panel with similar distribution to the elements in the real unit.
2 Function generators modules, that can generate 3 different signals: sinusoidal, square and
Each function generator includes:
Microphone pre-amplifier module, including:
PC input/output module, including:
SCSI connector for connecting with the data acquisition board (DAB) to be placed in the computer PC.
Power supply connector. Safety fuse.
Possibility of working simultaneously with two external signals, thanks to its inputs, facilitating operations that required more than one signal. Moreover it is possible to generate signals directly by the software and send them to the unit outputs and then visualizing by an external oscilloscope or listening by the speaker
DAB. Data Acquisition Board:
PCI Data acquisition board (National Instruments) to be placed in a computer slot. Bus PCI.
Analog input: Cchannels= 16 single-ended or 8 differential. Resolution=16 bits, 1 in 65536.
Sampling rate up to: 250 KS/s (Kilo samples per second). Input range (V)= 10V.
Data transfers=DMA, interrupts, programmed I/0. Number of DMA channels=6.
Analog output:Channels=2. Resolution=16 bits, 1 in 65536. Maximum output rate up to: 833 KS/s.
Output range(V)= 10V. Data transfers=DMA, interrupts, programmed I/0.
Digital Input/Output: Channels=24 inputs/outputs. D0 or DI Sample Clock frequency: 0 to 1 MHz.
Timing: Counter/timers=2. Resolution: Counter/timers: 32 bits.
TDS/CCSOF. Computer Control+Data Acquisition+Data Management Software:
Compatible with actual Windows operating systems. Graphic and intuitive simulation of the process in
screen. Compatible with the industry standards.
Registration and visualization of signals in an automatic and simultaneously way. 2 signals can be
Flexible open and multicontrol software, developed with actual windows graphic systems, acting
simultaneously on all process parameters.
Management, processing and comparison of data.
Sampling velocity up to 250,000 data per second.
Comparative analysis of the obtained data, after to the process and modification of the conditions during
Cables and Accessories, for normal operation.
This unit is supplied with 8 manuals: Required Services, Assembly and Installation, Interface and Control
Software, Starting-up, Safety, Maintenance, Calibration & Practices Manuals